Hygometers & Pyrometers

Hygometers
Bartec Gmbh manufacture a comprehensive range of Hygometers. Nexus is the Bartec distributor in Australia

4457 Portable Lab Hygometer

Typical Applications
Research Development Production Museums Air Conditioning	Horticulture Wine Growing Industries Meteorology Building Industry
For more information - download the Data Sheet (PDF Format)		Click logo above to download

K4326-23 Humidity and Temperature Transmitter

Typical Applications
Climate Chambers High end HVAC Dryers and Ovens	Process Technology Chemical Applications Green Houses
For more information - download the Data Sheet (PDF Format)		Click logo above to download

K 4326-31 Multifunction Humidity and Temperature Transmitter

The K4326-31 offers suitability in the following industries (in addition to the list for the K 4326-23)
Pharmaceutical industry	Meteorology
For more information - download the Data Sheet (PDF Format)		Click logo above to download

Z 1701-10 Industrial Hygometer

Measure Moisture and Oxygen concentration using the patented Dual Zircon-Oxide sensor principle. Consists of sensor and transmitter (including local indicator).
Textile Tender Dryers Baking Ovens Drying hoods Hot air tunnels Smoking chambers Rotary Kilns	The Food Industry Animal feed dryers Roasting Plants Calcination furnaces Plasterboard dryers
For more information - download the Data Sheet (PDF Format)		Click logo above to download

Z 1701-40 Industrial Hygometer

Measure Moisture and Oxygen concentration using the patented Dual Zircon-Oxide sensor principle. Consists of sensor and transmitter (without local indication).
Textile Tender Dryers Baking Ovens Drying hoods Hot air tunnels Smoking chambers Rotary Kilns	The Food Industry Animal feed dryers Roasting Plants Calcination furnaces Plasterboard dryers
For more information - download the Data Sheet (PDF Format)		Click logo above to download

H 4230-10 Process Hygometer

This device uses the psychometric gas humidity measurement in-line with the impact jet method to measure moisture. A full range of humidity variables can be measured: TT, HT, SP, aux temp with DT, MH, SH, vol % VP, h, DVP available as calculated variables. The unit can be used where air to be measured contains oil, fat vapor, solvents, water soluble gas or salt.
Hot air tunnels for cooking Food stuffs Test centres	Fertiliser dryers Various chemical processors Roasting Plants
*Portable design makes it suitable for:*
Test Centres Agencies for monitoring plants	Hot air tunnels for cooking
*Can also be used where air to be measured is highly contaminated with acids and other aggressive substances*
Copper-nickel works large combustion plants	HRSG Waste incineration plants
*Can be used for detection of heat exchanger tube failures*
H 4230-11 Process Hygometer
*Certified for use in explosion hazard environments zone 2 (zone 1 units available on special request*
H 4230-12 Process Hygometer
For more information H4230-10-* download the Data Sheet (PDF Format)*		Click logo above to download
For more information H4230-11-* download the Data Sheet (PDF Format)*		Click logo above to download
For more information - H4230-12* download the Data Sheet (PDF Format)*		Click logo above to download

H 5672 Moisture Analyser

Measure trace and residual humidity in gases and liquids, with emphasis on natural gas, technical gases and fluid hydrocarbons. Certified for use in explosion hazard environments zone 2 ATEX (II 1/2 G Eex ia IIC T6 ...T3)
Housing types include wall mounted (H-5672-31), 19 inch rack/desktop (H5672-21)
For more information - download the Data Sheet (PDF Format)		Click logo above to download

Bartec GmbH manufacture a comprehensive range of Pyrometers. Nexus Analytical are proud to distribute their products.

INFRA R 270 Stationary Pyrometer RS485/CAN

Non contact. Range 0 to 250°C. Sensor and measuring amplifier.
For more information - download the Data Sheet (PDF Format)	Click logo above to download

INFRAsmart R300, R301, R302 Stationary Pyrometers 4 - 20mA/HART

Non Contact. R300 Max 0 to 400°C. R 301 and R 302 Max 0 to 2000°C. Consists of sensor and transmitter with or without local indicator
Thermoforming machines for plastics Extruders for plastic Calandering lines for plastic films Coating machines	Glassworking Metalworking Supervision of products on conveyor belts Monitoring of plant overheating
For more information - download the Data Sheet (PDF Format)		Click logo above to download

INFRAsmart R310, R311, R312 & R320 Stationary Pyrometers 4 - 20mA/HART

Non Contact. R 310 and R 320 Max 0 to 400°C. R311 and R312 Max 0 to 2000°C. Consists of sensor and transmitter with or without local indicator
See INFRAsmart above for typical applications
For more information - download the Data Sheet (PDF Format)	Click logo above to download

INFRAsmart R330 Stationary Pyometers 4 - 20ma/HART

Non Contact. 0 to 400°C. Consists of sensor and transmitter with or without local indicator
The INFRA R330 is suitable to temperature measurements in different procedural processes in industrial applications (e.g tumble dryers)
For more information - download the Data Sheet (PDF Format)	Click logo above to download

INFRAline R2610 Stationary Pyometers 4 - 20ma/HART

Non contact Max 0 to 1300°C. Consist of sensor and transmitter (with or without local indicator) . PC valuation/presentation software (windows 98/NT/2000/XP) featuring data-recorder, data player, trend analysis is also available.

Typical applications in the manufacturing industries

Rubber

Textiles

Wood

Plastics

Opaque sheet materials

Bulk Materials

Metals

Galss

For more information - download the Data Sheet (PDF Format)

Click logo above to download

Policies - Privacy

Navigate Our Site

Ph (02) 9548 5766 Fax (02) 9548 5799